120 lines
7.5 KiB
Plaintext
120 lines
7.5 KiB
Plaintext
/*
|
|
* Copyright (c) 2013 ETH Zurich. All rights reserved.
|
|
*
|
|
* This file is distributed under the terms in the attached LICENSE file.
|
|
* If you do not find this file, copies can be found by writing to:
|
|
* ETH Zurich D-INFK, CAB F.78, Universitaetstrasse 6, CH-8092 Zurich,
|
|
* Attn: Systems Group.
|
|
*/
|
|
|
|
/*
|
|
* omap44xx_dsi1_phy_l4_per.dev
|
|
*
|
|
* DESCRIPTION:
|
|
*
|
|
* NOTE: This file has been automatically generated based on the
|
|
* XML files extracted from the TI RDT v1.0.0.4p Tool.
|
|
* Download from here: http://www.ti.com/product/omap4460
|
|
* This means that the file might not be optimal in terms of naming
|
|
* conventions for constants and registers (duplicated
|
|
* namespaces in register and device name etc.).
|
|
* Also, because of the underlying structure from the original XML
|
|
* it's possible that some constants appear multiple times (if they
|
|
* have slightly different descriptions for example).
|
|
*
|
|
* You want to clean that up before using the files for the first time!
|
|
*/
|
|
|
|
device omap44xx_dsi1_phy_l4_per msbfirst ( addr base ) "" {
|
|
|
|
|
|
register dsi_phy_register0 addr(base, 0x0) "Configuration register for HS mode timings" {
|
|
reg_thsprepare 8 rw "REG_THSPREPARE timing parameter in multiples of DDR clock period. DDR clock = CLKIN4DDR/4.D-PHY specification: 40 ns + 4 * UI / 85 ns + 6 * UI. UI = Unit Interval, equal to the duration of any HS state on the clock lane. . Default value is programmed for 400 MHz. .";
|
|
reg_thsprpr_thszero 8 rw "REG_THSPREPARE_THSZERO timing parameter in multiples of DDR clock period. DDR clock = CLKIN4DDR/4.D-PHY specification: > 145 ns + 10 * UI. . Default value is programmed for 400 MHz. .";
|
|
reg_thstrail 8 rw "REG_THSTRAIL timing parameter in multiples of DDR clock period. DDR clock = CLKIN4DDR/4.D-PHY specification: > 60 ns + 4 * UI. . Default value is programmed for 400 MHz. .";
|
|
reg_thsexit 8 rw "REG_THSEXIT timing parameter in multiples of DDR clock frequency. DDR clock = CLKIN4DDR/4.D-PHY specification: > 100 ns. . Default value is programmed for 400 MHz. .";
|
|
};
|
|
|
|
constants reg_ttago_status width(3) "" {
|
|
REG_TTAGO_1 = 1 "3 cycles";
|
|
REG_TTAGO_2 = 2 "4 cycles";
|
|
REG_TTAGO_3 = 3 "5 cycles";
|
|
REG_TTAGO_4 = 4 "6 cycles";
|
|
REG_TTAGO_5 = 5 "7 cycles";
|
|
REG_TTAGO_6 = 6 "8 cycles";
|
|
REG_TTAGO_7 = 7 "9 cycles";
|
|
};
|
|
|
|
constants reg_ttasure_status width(2) "" {
|
|
REG_TTASURE_0 = 0 "2 cycles";
|
|
REG_TTASURE_1 = 1 "1 cycles";
|
|
REG_TTASURE_2 = 2 "3 cycles";
|
|
REG_TTASURE_3 = 3 "4 cycles";
|
|
};
|
|
|
|
constants reg_ttaget_status width(3) "" {
|
|
REG_TTAGET_0 = 0 "3 cycles";
|
|
REG_TTAGET_1 = 1 "4 cycles";
|
|
REG_TTAGET_2 = 2 "5 cycles";
|
|
REG_TTAGET_3 = 3 "6 cycles";
|
|
REG_TTAGET_4 = 4 "7 cycles";
|
|
REG_TTAGET_5 = 5 "8 cycles";
|
|
REG_TTAGET_6 = 6 "9 cycles";
|
|
REG_TTAGET_7 = 7 "10 cycles";
|
|
};
|
|
|
|
register dsi_phy_register1 addr(base, 0x4) "Configuration register for LP mode and HS mode timings" {
|
|
reg_ttago 3 rw type(reg_ttago_status) "TTA-GO timing in terms of number of TXCLKESC clocks. 0x0: 2 cyclesDefault value: 4 cycles .";
|
|
reg_ttasure 2 rw type(reg_ttasure_status) "TTA-SURE timing in terms of number of TXCLKESC clocks.Default value: 2 cycles .";
|
|
reg_ttaget 3 rw type(reg_ttaget_status) "TTA-GET timing in terms of number of TXCLKESC clocks.Default value: 5 cycles .";
|
|
_ 3 mbz;
|
|
reg_tlpxby2 5 rw "(TLPX)/2 timing parameter in multiples of DDR clock frequency. DDR clock = CLKIN4DDR/4.Default value is programmed for 400 MHz. This is the internal timer value. The value seen on line will have variance due to rise/fall mismatch effects. . Note: TLPX is used to define the length of LP-01 state in HS start of Transmission sequences on clock and data lanes. For all other purposes TLPX is defined by the period of TXLPESC .";
|
|
reg_tclktrail 8 rw "REG_TCLKTRAIL timing parameter in multiples of DDR clock frequency. DDR clock = CLKIN4DDR/4.D-PHY specification: > 60 ns. . Default value is programmed for 400 MHz .";
|
|
reg_tclkzero 8 rw "REG_TCLKZERO timing parameter in multiples of DDR clock period. DDR clock = CLKIN4DDR/4.D-PHY specification: (REG_TCLKPREPARE + REG_TCLKZERO) > 300 ns. . Derived specification for REG_TCLKZERO (Min REG_TCLKPREPARE = 38 ns): REG_TCLKZERO > 262 ns. . Default value is programmed for 400 MHz .";
|
|
};
|
|
|
|
constants ovrrdulpmtx_status width(1) "" {
|
|
OVRRDULPMTX_1 = 1 "Enable weak pulldown on DSI lanes.";
|
|
OVRRDULPMTX_0 = 0 "Disable weak pulldown on DSI lanes (default).";
|
|
};
|
|
|
|
constants regulpmtx_status width(5) "" {
|
|
REGULPMTX_1 = 1 "Enable weak pulldown on the lane.";
|
|
REGULPMTX_0 = 0 "Disable weak pulldown on the lane (default).";
|
|
};
|
|
|
|
register dsi_phy_register2 addr(base, 0x8) "Sync pattern" {
|
|
hssyncpattern 8 rw "Default : 184 (10111000). MSB (last received bit of sync pattern), LSB (first received bit of sync pattern).";
|
|
_ 7 mbz;
|
|
ovrrdulpmtx 1 rw type(ovrrdulpmtx_status) "Global enable of the weak pulldown on the DSI lanes, configured through the [15:11] REGULPMTX bit field:";
|
|
regulpmtx 5 rw type(regulpmtx_status) "Configuration of the weak pulldowns on the DSI lanes.For each bit, the following settings apply: . Bit [15]: DSI lane 4 (applies only to DSI1; reserved for DSI2) . Bit [14]: DSI lane 3 (applies only to DSI1; reserved for DSI2) . Bit [13]: DSI lane 2 (applies to DSI1 and DSI2) . Bit [12]: DSI lane 1 (applies to DSI1 and DSI2) . Bit [11]: DSI lane 0 (applies to DSI1 and DSI2) .";
|
|
_ 3 mbz;
|
|
reg_tclkprepare 8 rw "TCLK-PREPARE timing parameter in multiples of DDR clock period.D-PHY specification: 38 ns / 95 ns. . Default value is programmed for 400 MHz. .";
|
|
};
|
|
|
|
register dsi_phy_register3 addr(base, 0xC) "Transmitted pattern" {
|
|
reg_txtriggeresc3 8 rw "Transmitted pattern when REG_TXTRIGGERESC3 is asserted (first bit transmitted to last bit transmitted). Default: 01100010";
|
|
reg_txtriggeresc2 8 rw "Default: 01011101";
|
|
reg_txtriggeresc1 8 rw "Default: 00100001";
|
|
reg_txtriggeresc0 8 rw "Default: 10100000";
|
|
};
|
|
|
|
register dsi_phy_register4 addr(base, 0x10) "Received pattern" {
|
|
reg_rxtriggeresc3 8 rw "Received pattern for which REG_RXTRIGGERESC3 is asserted (first bit transmitted to last bit transmitted). Default: 01100010";
|
|
reg_rxtriggeresc2 8 rw "Default: 01011101";
|
|
reg_rxtriggeresc1 8 rw "Default: 00100001";
|
|
reg_rxtriggeresc0 8 rw "Default: 10100000";
|
|
};
|
|
|
|
register dsi_phy_register5 addr(base, 0x14) "Reset done bits" {
|
|
resetdonetxbyteclk 1 ro "RESETDONETXBYTECLK 0x0: No reset 0x1: Reset done for the TXBYTECLK domain";
|
|
resetdonescpclk 1 ro "RESETDONESCPCLK 0x0: No reset 0x1: Reset done for the SCP clock domain";
|
|
resetdonepwrclk 1 ro "RESETDONEPWRCLK 0x0: No reset 0x1: Reset done for the PWR clock domain";
|
|
resetdonetxclkesc4 1 ro "RESETDONETXCLKESC4 0x0: No reset 0x1: Reset done for the TXCLKESC domain for lane 4";
|
|
resetdonetxclkesc3 1 ro "RESETDONETXCLKESC3 0x0: No reset 0x1: Reset done for the TXCLKESC domain for lane 3";
|
|
resetdonetxclkesc2 1 ro "RESETDONETXCLKESC2 0x0: No reset 0x1: Reset done for the TXCLKESC domain for lane 2";
|
|
resetdonetxclkesc1 1 ro "RESETDONETXCLKESC1 0x0: No reset 0x1: Reset done for the TXCLKESC domain for lane 1";
|
|
resetdonetxclkesc0 1 ro "RESETDONETXCLKESC0 0x0: No reset 0x1: Reset done for the TXCLKESC domain for lane 0";
|
|
_ 24 mbz;
|
|
};
|
|
}; |