/*
 * Copyright (c) 2011, ETH Zurich. All rights reserved.
 *
 * This file is distributed under the terms in the attached LICENSE file.
 * If you do not find this file, copies can be found by writing to:
 * ETH Zurich D-INFK, Universitaetstrasse 6, CH-8092 Zurich. Attn: Systems Group.
 */

/*
 * fat16_ebpb.dev
 *
 * DESCRIPTION: FAT16 file system extended BIOS parameter block.
 * 
 */

device fat16_ebpb msbfirst (addr b) "FAT16 Extended BIOS Parameter Block (EBPB)" {

    register drv  rw addr(b,0x24) "Drive number" type(uint8);

    // In [1], this is described as "current head". The same document says that
    // because it is not used as such, Windows NT uses it as follows instead (lsbfirst):
    //   - bit 0: need disk check
    //   - bit 1: need surface scan
    // [1] http://support.microsoft.com/kb/140418
    register rsv  rw addr(b,0x25) "Reserved" type(uint8);

    // Should be 0x29 to indicate this is an EBPB. 0x28 Also possible, in which
    // only the serial number follows.
    register ebs  rw addr(b,0x26) "Extended boot signature" type(uint8);

    register vsn  rw addr(b,0x27) "Volume serial number" type(uint32);

    regarray vlb  rw addr(b,0x2b) [11] "Volume label" type(uint8);

    // Should be "FAT16   "
    regarray fst  rw addr(b,0x36) [8] "File system type, informative" type(uint8);

};