/*
 * Copyright (c) 2013 ETH Zurich. All rights reserved.
 *
 * This file is distributed under the terms in the attached LICENSE file.
 * If you do not find this file, copies can be found by writing to:
 * ETH Zurich D-INFK, CAB F.78, Universitaetstrasse 6, CH-8092 Zurich,
 * Attn: Systems Group.
 */

/*
 * omap44xx_spinlock.dev
 *
 * DESCRIPTION: 
 *
 * NOTE: This file has been automatically generated based on the
 * XML files extracted from the TI RDT v1.0.0.4p Tool.
 * Download from here: http://www.ti.com/product/omap4460
 * This means that the file might not be optimal in terms of naming
 * conventions for constants and registers (duplicated
 * namespaces in register and device name etc.).
 * Also, because of the underlying structure from the original XML
 * it's possible that some constants appear multiple times (if they
 * have slightly different descriptions for example).
 *
 * You want to clean that up before using the files for the first time!
 */
 
device omap44xx_spinlock msbfirst ( addr base ) "" {
    
    
    register revision ro addr(base, 0x0) "This register contains the IP revision code" type(uint32);

    constants clockactivity_status width(1) "" {
        CLOCKACTIVITY_0_r = 0 "Interface clock is not required by the module during IDLE mode and may be switched off.";
        CLOCKACTIVITY_1_r = 1 "Interface clock is required by the module, even during idle mode.";
    };

    constants sidlemode_status width(2) "" {
        SIDLEMODE_0_r = 0 "Force-idle. IDLE request is acknowledged unconditionally and immediately.";
        SIDLEMODE_1_r = 1 "No-idle. IDLE request is never acknowledged.";
        SIDLEMODE_2_r = 2 "Smart-idle. IDLE request acknowledgement is based on the internal module activity.";
        SIDLEMODE_3_r = 3 "Reserved. Do not use.";
    };

    constants enwakeup_status width(1) "" {
        ENWAKEUP_0_r = 0 "Wakeup generation is disabled.";
        ENWAKEUP_1_r = 1 "Wakeup generation is enabled.";
    };

    constants softreset_status width(1) "" {
        SOFTRESET_0_w = 0 "No action";
        SOFTRESET_1_w = 1 "Start soft reset sequence";
    };

    constants autogating_status width(1) "" {
        AUTOGATING_0_r = 0 "Interface clock is not gated when the L4-CFG interface is idle.";
        AUTOGATING_1_r = 1 "Automatic internal interface clock gating strategy is applied, based on the L4-CFG interface activity.";
    };
    
    register sysconfig addr(base, 0x10) "This register controls the various parameters of the L4-CFG interface. Note that most fields are read-only." {
        _ 23 mbz;
        clockactivity 1 ro type(clockactivity_status) "Indicates whether the module requires the interface clock when in IDLE mode.";
        _ 3 mbz;
        sidlemode 2 ro type(sidlemode_status) "Slave interface power management (IDLE request/acknowledgement control).";
        enwakeup 1 ro type(enwakeup_status) "Asynchronous wakeup gereration.";
        softreset 1 wo type(softreset_status) "Module software reset.";
        autogating 1 ro type(autogating_status) "Internal interface clock gating strategy.";
    };

    constants numlocks_status width(8) "" {
        NUMLOCKS_1_r = 1 "This instance has 32 lock registers.";
        NUMLOCKS_2_r = 2 "This instance has 64 lock registers.";
        NUMLOCKS_4_r = 4 "This instance has 128 lock registers.";
        NUMLOCKS_8_r = 8 "This instance has 256 lock registers.";
    };

    constants iu0_status width(1) "" {
        IU0_0_r = 0 "All lock registers 0 31 are in the Not Taken state.";
        IU0_1_r = 1 "At least one of the lock registers 0 31 is in the Taken state.";
    };

    constants resetdone_status width(1) "" {
        RESETDONE_0_r = 0 "Reset in progress.";
        RESETDONE_1_r = 1 "Reset is completed.";
    };
    
    register systatus addr(base, 0x14) "This register provides status information about this instance of the Spinlock module." {
        numlocks 8 ro type(numlocks_status) "Number of lock registers implemeted.";
        _ 8 mbz;
        iu7 1 ro "In-Use flag 7. Reads always return 0.";
        iu6 1 ro "In-Use flag 6. Reads always return 0.";
        iu5 1 ro "In-Use flag 5. Reads always return 0.";
        iu4 1 ro "In-Use flag 4. Reads always return 0.";
        iu3 1 ro "In-Use flag 3. Reads always return 0.";
        iu2 1 ro "In-Use flag 2. Reads always return 0.";
        iu1 1 ro "In-Use flag 1. Reads always return 0.";
        iu0 1 ro type(iu0_status) "In-Use flag 0, covering lock registers 0 - 31.";
        _ 7 mbz;
        resetdone 1 ro type(resetdone_status) "Reset done status.";
    };

//XXX:commented out repeated values, since the compiler would complain about duplicate case values
    constants taken_status width(1) "" {
        TAKEN_0_r = 0 "Lock was previously Not Taken (free). The requester is granted the lock.";
//        TAKEN_0_w = 0 "Set the lock to Not Taken (free).";
        TAKEN_1_r = 1 "Lock was previously Taken. The requester is not granted the lock and must retry.";
//        TAKEN_1_w = 1 "No update to the lock value.";
    };

//changed individual register definitions to a regarray

    regarray lock_reg_i addr(base, 0x800)[32] "This register contains the state of one lock."{
        _ 31 mbz;
        taken 1 rw type(taken_status) "Lock State";
    };
    
};